Many fully electric vehicles have their high voltage battery mounted low down under the floorpan of the vehicle which is intended to be 'sealed' from the elements to prevent water ingress, should the vehicle drive through deep water for example. To ensure the battery is correctly sealed the manufacturers recommend an �integrity test� which is a pressure test to check for leaks in the battery seals, particularly the large top seal that runs around the edge of the battery top. The pressure is very low and must be introduced slowly to prevent any internal battery cell pack damage. The pressures vary from manufacturer to manufacturer, but are usually between 20 - 50 Millibar (0.8psi max). The Laser 8467 kit has been developed to allow a suitably qualified technician to pressure test these batteries in a safe and controlled manner. Warning: Always adhere to the manufacturers instructions and specifications.
Applications: Hyundai Kona EV, Jaguar I-Pace, Kia Niro EV and Nissan Leaf.
Supplied with a digital manometer (pressure gauge) for accurate readings.
Supplied with pump and adaptors.
Always ensure all battery breather and electrical connection ports are sealed (sealing tape included).
Always follow the vehicle manufacturers instructions and never exceed the maximum recommended pressure. Designed and made in Sheffield.
Laser Tools EV Battery Integrity Pressure Test Kit - for Hyundai, Jaguar, Kia & Nissan - MPN 8467
Was £528.60 VAT INC Save £25.00 (6%)
- Laser Tools, spend between £50 & £99 to save £5
- Laser Tools, spend between £100 & £199 to save £15
- Laser Tools, spend over £200 and save £30
